基于复合相变材料的梯级组合蓄热特性研究

针对潜热蓄热装置内部相变材料（PCM）导热系数偏小，蓄热速率过低的问题，对基于复合相变材料的两级串联式梯级蓄热装置的相变过程进行了数值研究。通过对不同热物性PCM工况的对比与分析，得到了装置在不同工况下的蓄热特性。结果表明，存在最佳的热扩散系数，使固定熔点的PCM实现“均匀等速相变”。同时，增大PCM的热扩散系数可以有效降低加热面温度，但随着热扩散系数的增大，加热面温度降低幅度减小。通过分析Stefan数，得到了装置最佳的参数，使工况蓄热效果最佳。最后，通过Stefan数为2.88时的实验工况验证了相关规律的正确性。     

海绵负载纳米Al2O3复合吸附剂去除水中硒研究

研究制备了海绵负载纳米Al2O3微球的复合吸附剂(NAS),并用于对Se(Ⅳ)和Se(Ⅵ)的吸附。结果表明,合成的纳米Al2O3微球(NAO)的平均尺寸为200~400 nm,在海绵上负载NAO会使其分散性更好。当NAO负载量分别为80 mg/g和60 mg/g时,NAS对Se(Ⅳ)和Se(Ⅵ)的吸附性能为佳,分别需要60、120 min达到平衡,适应pH为2~5;两者均符合准2级动力学模型;NAS对Se(Ⅳ)、Se(Ⅵ)的最大吸附容量分别为137.2、143.9 mg/g,能很好地与Freundlich模型拟合,说明NAS表面不均匀,且属于多层吸附。经过2次的循环,对Se(Ⅳ)和Se(Ⅵ)的去除率有所降低,但均仍保持在一定的水平,说明NAS可再生循环利用。NAS作为一种新型吸附剂去除水中Se具有较好的应用前景。     

Application of the pack cementation process on SiC/SiC ceramic matrix composites

The potentials and limitations of a halide-activated pack cementation process on SiC/SiC Ceramic Matrix Composites for the development of bond coats as part of environmental barrier coating (EBCs) systems were investigated. Different pack compositions using chromium, aluminum and alloys of these elements were tested and the kinetics of coating formation were examined in addition to their microstructure. The results and their analogy to diffusion couples were discussed and it was shown that coating elements which form silicides and carbides are promising candidates for coatings deposited on SiC/SiC via pack cementation. Based on such considerations a two-step pack cementation was proposed, which used chromium, one of the suitable elements, in a first step, to finally achieve an alumina-forming coating. The oxidation resistance of the developed coating was tested via thermogravimetric analysis and compared to the uncoated material. The coating protected the fiber-matrix interface of the SiC/SiC Ceramic Matrix Composites from oxidation.     

Environmental effects on the strength and impact damage resistance of alumina based oxide/oxide ceramic matrix composites

In this study the effects of high temperature and moisture on the impact damage resistance and mechanical strength of Nextel 610/alumina silicate ceramic matrix composites were experimentally evaluated. Composite laminates were exposed to either a 1050°C isothermal furnace-based environment for 30 consecutive days at 6 h a day, or 95% relative humidity environment for 13 consecutive days at 67°C. Low velocity impact, tensile and short beam strength tests were performed on both ambient and environmentally conditioned laminates and damage was characterized using a combination of non-destructive and destructive techniques. High temperature and humidity environmental exposure adversely affected the impact resistance of the composite laminates. For all the environments, planar internal damage area was greater than the back side dent area, which in turn was greater than the impactor side dent area. Evidence of environmental embrittlement through a stiffer tensile response was noted for the high temperature exposed laminates while the short beam strength tests showed greater propensity for interlaminar shear failure in the moisture exposed laminates. Destructive evaluations exposed larger, more pronounced delaminations in the environmentally conditioned laminates in comparison to the ambient ones. External damage metrics of the impactor side dent depth and area directly influenced the post-impact tensile strength of the laminates while no such trend between internal damage area and residual strength could be ascertained.     

Stress field and damage evolution in C/SiC woven composites: Image-based finite element analysis and in situ X-ray computed tomography tests

The construction and examination of meso-structural finite element models of a Chemical-Vapor-Infiltrated (CVI) C/SiC composite is carried out based on X-ray microtomography digital images (IB-FEM). The accurate meso-structural features of the C/SiC composites, which are consisted of carbon fiber tows and CVI-SiC matrix, in particular the cavity defects, are reconstructed. With the IB-FEM, the damage evolution and fracture behaviors of the C/SiC composite are investigated. At the same time, an in situ tensile test is applied to the C/SiC composite under a CT real-time quantitative imaging system, aiming to investigate the damage and failure features of the material as well as to verify the IB-FEM. The IB-FEM results indicate that material damage initially occur at the defects, followed by propagating toward the fiber-tow/SiC-matrix interfaces, ultimately, combined into macro-cracks, which is in good agreement with the in situ CT experiment results.     

Partial electrode method for loss and physical parameter determination of piezoceramics: Simplification,error investigation and applicability

The IEEE standard to determine physical parameters of piezoceramics has been utilized for decades by many researchers, yet it omits presence of important loss factors and possesses serious deficits that restrict accurate parameter determination. To resolve these issues, the partial electrode (PE) method was previously proposed, though the focus has been merely made on development of the method itself. In this study, we provide method simplification and more detailed analysis. The omission of unnecessary samples greatly boosts experiment and analysis process. To prove that the PE method is reliable, possible causes of errors were investigated; it is shown that they were either negligibly small or can be resolved with proper calibration. Furthermore, Applicability of PE method to various types of piezoceramic materials and compatibility with impedance analyzers are shown. Finally, PE method is proved to be reliable and can be alternative to IEEE Standard on Piezoelectricity.     

Effect of functionalized silicon carbide nano-particles as additive in cross-linked PVA based composites for vibration damping application

In this research study, a comprehensive effort has been made to functionalize silicon carbide particles using the acidic oxidation with nitric acid to obtain homogeneous stabilized distribution of activated SiC particles within a polymer matrix, and develop functionalized silicon carbide (f-SiC) particle reinforced polyvinyl alcohol (PVA) based cross-linked composite. After fabrication of functionalized silicon carbide (f-SiC) particle reinforced polyvinyl alcohol based cross-linked composite with varying f-SiC weight percentages of PVA (0%, 1%, 2%, 3%, and 4%) were placed to various investigations. Processed samples are initially examined based by the physical tests (water absorption tests), followed by mechanical test (tensile test) and then micro-structural tests (scanning electron microscopy). Lastly, thermal tests were also concluded which involved the dynamic mechanical, differential thermal and thermo gravimetric analysis. The cross-linked polyvinyl alcohol-based composite with 2 weight % of f-SiC content is observed to be the superlative of all the compositions under this research study that was confirmed by the mechanical and micro-structural tests. This composite material shows high storage modulus with visco-elastic behavior, therefore, the material can be utilized to diminish the transmission of noise, as a shock absorber and vibration isolator.     

A triple (e−/O2−/H+) conducting perovskite BaCo0.4Fe0.4Zr0.1Y0.1O3-δ for low temperature solid oxide fuel cell

Low-temperature solid oxide fuel cells (LT-SOFCs) have recently gained enormous attention worldwide with a new research trend focusing on single layer fuel cells (SLFC), which have better cell performance than traditional SOFCs at low operating temperatures. In this study, a triple (e^?/O^2?/H⁺) conducting perovskite BaCo_0.4Fe_0.4Zr_0.1Y_0.1O_3-δ (BCFZY) is used as the intermediate layer material for SLFC. A high current density of 994 mA/cm² at 0.6 V and a peak power density of 610 mW/cm² with an OCV of 1.01 V has been achieved with a cell operating temperature of 550 °C, confirming the application feasibility of BCFZY in SLFCs. Furthermore, a typical proton conductor BaZr_0.8Y_0.2O_3-δ (BZY) is introduced into BCFZY to enhance the cell performance. By adjusting the mass ratio of the BCFZY-BZY layer, an optimal power density is obtained, achieving 703 mW/cm² with an OCV of 1.03 V at 550 °C with an 8BCFZY:2BZY (wt%) ratio. These findings prove that the proposed BCFZY-BZY holds great promise for developing SLFCs to realize low-temperature operation.     

Study of crystal structure,dielectric, magnetic and magnetoelecrtic properties of xCoFe2O4-(1-x)Na0.5Bi0.5TiO3 composites

Multiferroic composites of spinel ferrite and ferroelectric xCoFe₂O₄ – (1-x)Na_0.5Bi_0.5TiO₃ (with x = 0.10,0.30,0.50) were efficiently prepared by standard solid state reaction mechanism. X-ray diffractometer was used to analyze crystal structure of the prepared composites. The observed XRD patterns of the composites comprise peaks of both the phases i.e. ferrite and ferroelectric, with no sign of secondary peaks. Rietveld refinement of XRD data further confirms the coexistence of these two phases with cubic (Fd3m) and rhombohedral (R3c) symmetry corresponding to ferrite and ferroelectric phase respectively. The 3-dimensional overview of crystal structure of pure CoFe₂O₄ and Na_0.5Bi_0.5TiO₃ and of composite 0.50CoFe₂O₄?0.50Na_0.5Bi_0.5TiO₃ is generated by using refined parameters. The dielectric constant (ε´) and dielectric loss (tanδ) values were recorded as a function of frequency ranging from 100?Hz to 7?MHz and at different temperatures. Both ε´ and tanδ follow dispersion pattern at lower frequencies while show frequency independent behavior at higher frequencies. The magnetic evaluation carried by analyzing M-H hysteresis loop reveals the ferrimagnetic characteristics of these composites. The highest value of magnetic moment is 1.12μ_B observed for composite 0.50CoFe₂O₄ – 0.50Na_0.5Bi_0.5TiO_3. Magnetoelectric (ME) voltage coefficient (α) was also demonstrated to observe the interaction between ferrite and ferroelectric phases. The highest value of α (72.72μV/Oe cm) is obtained for low ferrite composition 0.10CoFe₂O₄ – 0.90Na_0.5Bi_0.5TiO₃, which suggests the dependence of magnetoelectric response on the resistivity of the composites.